xTool smoke purifier exhaust port converter (10cm, 4in)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows you to connect a standard dryer hose to the exhaust of the Smoke Purifier to vent the remaining fumes.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have the xTool Smoke Purifier as I live in a flat and don't want to vent fumes straight out of the window. The purifier does a good job on the fumes but I wanted to be sure nothing was coming into the room.
The hose that comes with the purifier isn't very long, so I bought a hose for a tumble dryer and made this adapter that fits over the existing outlet.
I printed mine with eSUN PLA+ on the Bambu P1P.
Nozzle: 0.4mm, 0.2 ‘strength mode’.
I used a brim, as it's a fairly long print but it may not need it.