SNES Buttons Keycaps

Description

Hello there!

A simple idea, but one that I’m sure will delight many! Keycaps inspired by the buttons of the Super NES!

### What type of switches are these keycaps for?
There are different keycaps for different switches.
- **MX Stem:**
 - 1.59 x 1.59 x 4.7mm (Xbtn1.59x4.7.stl, Abtn1.59x4.7.stl, Bbtn1.59x4.7.stl, and Ybtn1.59x4.7.stl)
- **Smaller dimensions:**
 - 1.33 x 1.33 x 4.5mm (Xbtn1.33x4.5.stl, Abtn1.33x4.5.stl, Bbtn1.33x4.5.stl, and Ybtn1.33x4.5.stl)

### And for which key?
They aren’t modeled for a specific key, but it’s preferable to use them on the directional arrows, though you are free to choose.

### Contents
**1.33x4.5:**
- Xbtn1.33x4.5.stl
- Abtn1.33x4.5.stl
- Bbtn1.33x4.5.stl
- Ybtn1.33x4.5.stl

**1.59x4.7:**
- Xbtn1.59x4.7.stl
- Abtn1.59x4.7.stl
- Bbtn1.59x4.7.stl
- Ybtn1.59x4.7.stl

**Hollow (keycaps without stems):**
- XbtnHollow.stl
- AbtnHollow.stl
- BbtnHollow.stl
- YbtnHollow.stl

### Dimensions
- 18 x 18 x 8mm

### Any problem?
If any of the files don’t suit you, feel free to contact me.

The images are renderings; when you print the model with your printer, the keycap will be colorless. You will need to paint it to achieve a more realistic look.

## 3D PRINTING SETTINGS

SLA Printing

- **Printer:** Anycubic Photon Mono X2

- **Raft thickness:** 2.7mm
- **Raft angle:** 45

- **Bottom exposure:** 25s
- **Normal exposure:** 2.5s
- **Off time:** 0.5s
- **Bottom layers:** 5
- **Layer thickness:** 0.05mm

- **Z lift distance:** 8mm
- **Z lift speed:** 2mm/s
- **Z retract speed:** 3mm/s
- **Support:** Yes, be careful of print detachment due to the suction effect. I used small supports with my printer.

- **Slicer:** Anycubic Photon Workshop