Rugged box for Panasonic Lumix Lenses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged box for your G-Series Lens
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2024-07-11: New lid and fill for the 25mm 1.7 lens.
Protect your camera lenses!
As a travelling photographer i needed a way to protect my lenses so that if htey get thrown around a bit the lenses are still safe. I am slowly adding more lenses to this - please send me a message if you'd like to see a model not yet listed.
You will need 30mm M3 button-head screws like these:
Amazon Affiliate Link
Print instructions
The easiest way, by far, is to use the 3MF i provide. it has all the parts and settings and orientation. Choose colors and print.
If you want to set the slicer up yourself, then:
- When adding to slicer, create a new project. Drag the Fancy lid, lid logo, and lid text to the slicer together. Slicer (orca/BambuStudio) asks if you'd like to add the STLs as parts of a single object. Say YES.
- All three files will be linked. Now you can simply chose a filament for each one and print the file.
Use your preferred settings if using TPU for the box fill. I prefer low infill percentage to make the box soft, but materials vary so adjust to your TPU.