Drybox filament access port with UBBI system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All you need for printing right from the drybox!
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 178
- Wydruki
- 4
- Wyświetlenia
- 1132
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UBBI enabled port for accessing filament from inside the drybox
Features:
- Almost airtight, less work for the dessicant to keep the drybox dry!
- Multiple installation selections to choose from
- Inset design allows stacking boxes right on top
- Drill guides included for easier hole location
- Supports both ECAS04/PC4-M10
Variations:
| Name | Pros | Cons | BOM |
| Basic | Easy to assemble | Port will slip if turned too hard | 11x1mm oring (optional) x1 PC4-M10/ECAS04 x1 |
| Glue-on | Quick installation Avoids unwanted turning | Glue may come off after time | 11x1mm oring (optional) x1 Glue/double sided tape PC4-M10/ECAS04 x1 |
| Screw-on | Secure, strong Avoids unwanted turning | Takes up space Multiple holes to drill | 11x1mm oring (optional) x1 PC4-M10/ECAS04 x1 Button head M3x6mm x2 Heatset insert M3x(4.3-5)x4 x2 |
| Inset | Sits 1mm above the surface Allows box stacking even with top facing ports | Multiple parts Big hole size Takes up space May slip if oring is not installed | 11x1mm oring (optional) x1 34x2mm oring (optional) x1 PC4-M10/ECAS04 x1 |
🤩 Do you like the design? You can help fund innovations like this!
Consider supporting me!
Much appreciation given to my supporters, and you get exclusive access to various CAD files!
Submit feature requests here!
Recommended print settings:
- Nozzle diameter: 0.4mm
- Layer height: ≤ 0.2mm
- Reverse on odd: disabled
- Precise walls: enabled
- Wall order: i/o/i
- Tolerance requirement: 0.1mm
- Print orientation: as imported
- Supports: included with the model, enable support generation and change to manual placement, don't add anything
NOTE:
The first 3-4 snaps must be done with a wrench, to break in the mechanism before it gets soft enough to be used by hands!
Recommended materials:
- PETG
- ABS/ASA
Changelog: