Multi-Purpose Stand (Wide and Short Versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Versatile stand for keyboard, phone, and other devices. Desk or 4mm edge use. Wide and short + 2-vers. cut for stability
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Design Features:
- Shape: Two versions: wide and short, each with a cut version for added stability.
- Dimensions: Designed to hold keyboards, phones, and similar items.
- Mounting Options: Can be placed on a desk or hung over a 4 mm edge.
- Stability: Additional version with a cut bottom for enhanced stability in free-standing use.
Print Settings:
- Layer Height: 0.2 mm.
- Infill: 20-100% adjust as needed for adequate strength.
- Supports: Not required if printed on its side.
Material:
- Recommended materials are PLA, PETG, or other durable 3D printing materials.
Usage:
- Primary Use: Designed as a keyboard holder.
- Other Uses: Suitable for holding phones and similar devices.
- Placement: Can be used on a desk or hung over a 4 mm edge for versatile setup options.
This multi-purpose stand is designed to be a versatile solution for organizing your workspace. It is ideal for holding keyboards, phones, and other similar devices. The stand comes in two versions: wide and short, each available in a cut version for enhanced stability when used as a free-standing unit. It can be placed on a desk or hung over a 4 mm edge, providing flexibility in setup and use. This stand can be printed without supports if printed on its side.