Can Koozie Holder - Magnetic & Hex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Koozie Holder with Hex cutout.
- Ocena
- 4,75 / 5
- Polubienia
- 94
- Pobrania
- 648
- Wydruki
- 4
- Wyświetlenia
- 2120
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted one that could attach to the side of my garage fridge. Hex because why not. I can upload without the hex cutouts if requested.
Can still use #6 wood screws to mount to the wall or 6x 2.5mmx10mm magnets worked for me. I also used PETG for garage that gets decently warm in the summer. Can still be printed in PLA. I also used tree supports just on the front lip. No supports should be required for the hex or magnet cutouts. Print with the open end up.
Left plenty of play in the magnet area for variations so some quick glue would be required if going the magnet route.
Shout out to Darren Henson for the original!