Spice Rack Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple bracket for mounting a spice rack in a cabinet or on the wall
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Created for our RV camper and inspired by similar design of a plant shelf from IKEA.
I printed ours in PETG and spray-painted them. Mirror the design to print the right-hand bracket.
The design is intended to utilize a 3/8" dowel and a ¼" hobby board, both of which can be purchased from Home Depot or other hardware stores.
Cut the ¼" hobby board to 60mm wide strip so it fits inside the recess in the bracket. Cut another strip, 10mm wide for the shelf lip, glue the two together and sand the edges round until the shelf fits snuggly into the bracket recess. Cut into the desired length; ours is 11" wide, which holds 6 of the spice containers shown in the picture.
Cut the dowel about 20mm longer than the shelf, sand it as necessary and slide it into round holes of the bracket. Friction fit should suffice for the dowel. I recommend gluing the shelf to the bracket using Gorilla glue or similar.