Wall Pocket | Full Bed Width!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're gonna make a pocket, make it big! 🌎
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nothing groundbreaking here! Just another wall pocket. 🤷 I needed one for behind the TV, particularly to keep all of my remotes away from my little ones. 👶 This one is simple and makes use of your entire print bed… assuming your print bed is 220mm wide.
Print with PLA or PETG. Orient the model with the bottom of the wall pocket on the bed to avoid using supports. Scale the model for different sizes!
I hope you find this print useful and please post your makes!
Exact Dimensions:
Version 1: 220mm wide x 25mm deep
Version 2: 220mm wide x 55mm deep
Layer Height: 0.2mm
Perimeters/Walls: 3 (add more for more strength)
Infill: 10% (increase more for more strength)
Brim: Recommended - corners may try to lift
If you love this model, please consider Buying Me a Coffee or maybe send a tip via Cash App! ♥
https://buymeacoffee.com/claytr0n
https://cash.app/$claylinco