94 modeli
So I didn't see many (any?) remote control holders for 3 remotes, so I whipped one up in Fusion 360. It seems to hold any standard Sony, Samsung and LG remotes. Also holds the newer Comcast/Xfinity voice remotes. I think each slot has the…
Info: well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time design is parametric (see source file), so any book width/height is…
Custom under coffee table top shelf basket for my remotes
simplified mesh and adjusted angles to suit my printer needs while speed printing
Del original de tres lo convertí a 2 control remoto, a disfrutar! Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3 mm Infill: 15 % **Filament:** PrintaLot PLA Negro Category: Organization
I think this other remote design is more common, so check this one before printing this design: https://www.thingiverse.com/thing:6935355 But if that design doesn't fit your remote, maybe see if this one will fit.
This is a simple, clean tabletop housing designed for the IKEA BILRESA smart Dual Button Remote (806.178.76) and the Scroll Wheel Remote (706.174.57). Since the BILRESA is a great affordable Matter-compatible button, I wanted a way to…
This is a simple remote holder for four remotes. There are already a lot on this site but not for the random remotes I had lying around so I made this set of one larger slot and three smaller slots. The smaller slots are 18 mm by 55 mm…
New: Remotes_Plus_Phone_Holder_V1 [ OnShape Model ] Holds 3x remotes + phone Extra mounting point at the bottom Remotes_Holder_V3 [ OnShape Model ] + Chamfer to support top bevel printing + Better transition between basket and top
I just need a different holder for all my remotes including my AC remote which is bigger.
Fits ID Remotes foam insert (~77x52x18mm) snugly. Hinge pin hole modeled 2mm diameter, but printed as a tight fit for 1.75mm filament with settings below. Mine was printed in PETG 0.4mm nozzle, 0.3mm layer height, 3 perimeters & 4…
slicing recommendations: -0.2 to 0.3 layer height -2 walls and “print thin walls” or Arachne Walls ON(!) -0-15% Gyroid infill (if you use <10% infill i recommend 5-6 top layers) -BRIDGing ON!! (lower down the "minimum bridge wall length"…
Simple print without supports, 0.2mm, and 15% infill. Made to attach with CA glue or adhesive mounting tape to shop remotes but can be used for anything. Horizontal and vertical orientations available.
There are many LED lamps and LED strips for sale nowadays which are equipped with surprisingly similar-looking credit-card sized IR remotes to use on them. These remotes have a tendency to get lost and always be in the place that you did…
Easy PLA print - all buttons are accessible while in the holders, remotes are easily removable, installs with two small screws. Parametric OpenSCAD file (FanRemoteHolder.scad) means you can measure any vaguely similar remote & insert the…
A wall mount for remotes (or other items) that can edited by changing the variables in Fusion 360. The remote used in the photo is the IIyama YKF326-029 (Probably the same as the YKF326-019 from Philips). The files for this remote are…
Including both the 3-gang version as well as an AppleTV only version.
This box has two compartments, each 65mm by 33mm and 100mm deep. I made it for storing the remotes. I used two countersunk M4 wood screws to mount it. The Scad file contains a variable named "overhang_angle", this determines the angle of…
Dual Remote Holder – Clean, Simple, and Functional Keep your space organized with this sleek dual remote holder! Designed to neatly store two remotes side-by-side, this holder helps eliminate clutter on your desk, nightstand, or coffee…
Skadis holder for 4 remotes.
I needed room and still easy access for the remotes and other stuff we need in a hurry. There's even room for a glasses spray and cleaning cloth! I am really pleased! The picture shows the one and only print I made. I have reworked the…
I wanted somewhere to tidy up the space and find a place to put always the remotes (so I don't have to look for them every time) and also a place to rest my book so I designed this holder to it on my Ikea Friheten sofa. This holder will…
Easy to print remotes holder with 4 slots. It can be hung with 2 sided tape or used as a stand. Slots prepared for thicker remotes (like LG Magic Remote) Print settings: 2 walls 10-20% infill 0.2 layer height
Stand for remote controls for tv and other
Summary After searching in vain for a suitable option, I ended up making my own. It is a parametric design, so you easily adjust pretty much any dimension in Fusion's parameters table to fit your remotes. I didn't put keyholes for screws…
A printed quad lock compatible phone holder for DJI and alike remotes. Phone is also held up at a slight angle. The lock can be inserted into any of the hexagons to accommodate a larger phone. Either one m3x30 is needed or if you're not…
A TV holder for your remotes. I thought it would be pretty funny… right? This holds two remotes and should fit almost all of them. (I have a bunch, and it fits them all) There is a slight balance issue, if you have large or tall remotes…
Remotes holder for IKEA Friheten sofa and others. Solidworks projects included for easy remix
Holds up to three remotes stacked on top of each other. Original dimensions are H85mm W74mm L80mm but length can be easily scaled to accommodate shorter or longer remotes. Printing in PLA with a single perimeter and 15% gyroid infill…
Del original de tres lo convertí a 1 control remoto, a disfrutar! Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3 mm Infill: 15 % **Filament:** PrintaLot PLA Negro Category: Organization
This is a two-piece cover for a single (86mm) or double (146mm) British/European switch plate. It hides the physical light switch and allows wireless home automation remotes to be stuck on over it but it easily removed if access to the…
Holder for 2 remotes (up to 45mm width) and pens or other stuff in central compartment
Beltclip for Zepro Truck taillift remotes designed to be printed in TPU Designed this to replace the originals that are expensive and break very often, been using this for the last 2 years at the company i work for on around 70 remotes…
Wall-Mounted Holder for Two Remote Controls Give a TV and AC remote one permanent home on the wall, so they stop disappearing around the room. Need a custom part for your setup? I design print-ready models from photos, sketches and…
This minimalist remote control holder is designed to keep your living room tidy while blending seamlessly into modern interiors. The angled front makes it easy to grab your remotes, while the internal dividers keep everything organized…
Allows you to mount 4 Wii Remotes and 4 Nunchucks on a Skadis board while saving more space than the individual modular version. I printed with 0.4mm nozzle at 0.2 layer height 15% infill with tree supports which went well.
This design has been modelled and tested to work with the RLA502A720 remote control that accompanies Many Mitsubishi Heavy Industries Split-System Air Conditioner Units. Can be scaled if needed and should have plenty of tolerance for less…
Stand for TV remotes. It has six slots; three thicker, three thinner. Print with PLA or PETG, no supports needed.
This holds your remote snug and tight at a fixed position in your room. No more searching! If you want a looser grip, just strech it in x- and y- dimensions by about 2-3%.
I made this to try and tidy up my messy bedside table. It fits a FireTV remote, JVC audio remote, Hue and Ikea Tradfri remote, Bluetooth headphones and a spare. Printed at 0.36mm layer height on a 0.6mm nozzle. I used ironing to make it…
I created a small LED remote holder. I think that you will need to scale the model up otherwise it will be hard to put or take the remote… Feel free to comment, remix and post makes ! If you need help please contact me. If you want to…
The universal remote never quite caught on in our house. Over the years we have always had a remote for the TV and for the cable box at a minimum. Universal remotes always resulted in a compromise or a “programming” nightmare. These days…
Print in TPU or Flexible PLA. This adapter is intended for a wide variety of Roku remotes. Designed to slide over the bottom of the remote, this adapter securely holds an Apple AirTag. Never lose your remote again!
A holder for your TV remote that slips in between your mattress.
There's not much space on the small table I keep next to my TV chair, so dealing with my 2 remotes is a bit cumbersome. I used cheap calipers to take the remotes' dimensions and then used OnShape to design a holder for them. To print I…
Эта подставка предназначена для небольших пультов дистанционного управления. Вы можете настроить размер в соответствии с вашими потребностями. This stand is for small remotes. You can adjust the size to suit your needs. SIzes: (…
I have four remotes so i made one holder for them Holder size: 186mm*32mm*28mm Sony tv remote size: 48mm*24mm Startsat remote size: 48mm*24mm Xiaomi remote size: 38mm*15mm LED remote size: 42mm*8mm I tried to attach the holder to the wall…
I've got two young kids and hunting for remote controls was a constant source of frustration. I figured out that if you group the remotes all in one place, they're larger so you spot them easier, and if you found one, you found them all.…
Do you keep losing your remote like me? Do you also wish that your couch had a designated remote holder? Then this clippable remote bowl for your couch armrest might be your solution. Can also be used as a small snack tray that can't be…
I couldn't find a remote holder with a big enough spot for my ancient electronics. So here it is! Room for a TV and VHS/DVD remote. Printed in PLA at 0.2mm
Remote storage for a coffee or end table. A modified version of https://www.printables.com/model/137242-remote-control-holder/files . The holder was almost doubled in size compared to the original at 70mm. Middle hole enlarged to handle…
It's fairly dark around my TV. With a black sofa. the remote easily disappear. I designed a band to add to the remote for easier spotting - print in a light colour obviously :) I uploaded a new model - now there's one for the solar and…
Simple design to fix a holder on a shelf for remotes : Apple TV and TV Thickness is 3mm for robustness. Two M8 screws are included in the back of the holder. It has to be printed vertically (with supports), I know it's not the best for…
Prints fast, isn't bulky and holds the remote well. Takes only around 3g (0.98m) of filament.
A wall mounted holder for the Optoma remote control. Not sure if the dimensions are the same between all their projectors but this came with the GT2000HDR.
Works with a 54mm wide by 7.8mm thick controller. Attaches to wall with push pins
I don’t like the way most remotes look - perhaps the combination of it and its surroundings? The intent of this design is to unobtrusively highlight the remote or other items placed on the holder. At the same time, elicit a visual…
I created a unified holder for my three remote controls—one for the TV, one for the receiver, and another for the lights—to solve the persistent issue of misplacing them, particularly the one I needed the most. Additionally, I…
There are many LED lamps and LED strips for sale nowadays which are equipped with surprisingly similar-looking card-shaped IR remotes to use on them. These remotes have a tendency to get lost and always be in the place that you did not…
remote holder for up to 6 xfinity tv remotes
This is a holder for your Aircon remote or other similar sized remote. I designed for wall or cabinet mount with double sided tape. A flange on the rear ensures the mount sits flush against the surface with the tape invisible. The front…
90% gyroid infill with 0.12-0.05mm layer height Printed with 0.25 nozzle. Tested on Futaba 10PX/R but may work for 7px/6pv and others.
Small remotes stand which you can stick to a table or anything else using double sided tape. The slots to the sides are made for the Apple TV remote and Samsung TV. The middle one made for anything else bigger. You also get a long pocket…
Printed in PLA, 0.40 mm nozzle and 0.20 mm layer on Prusa MK4S, in upright position with support.
I made an hinge design for my LED strip remotes, because I lose them all the time and now they stay in the same place.
I designed this to have somewhere to put my collection of tiny remotes I have accumulated for various small appliances around my office (fans/window units/humidifiers). This gives these remotes a specific home and keeps them from floating…
Some handles/sleeves for quickly touch identify the TX16S switches in FPV, when you can't look at your remote. Just print in TPU 95A and enjoy!
Got 2 remotes control laying on my desk always at bad place so i made this holder A like - A comment and feedback is totally free for you and appreciate to go on and improve myself and follow in the right direction.
Wall mount for Hormann remote. Suited for HS BS series (HS2-868-BS, HS4-868-BS, HS5-868-BS).
The buttons are cheap and use the EV1527 code. They're available in at least white housings with red, yellow, green or blue ring. ZigBee versions in similar looking cases are also available (one version is a sos button), but I haven't…
What Remote organizer to keep them organized. It can hold remotes as wide as 72mm and as thick as ~30mm. Print It should be an easy print. Please submit make and leave comment. Any suggestions for improvements are welcome.
There are many LED lamps and LED strips for sale nowadays which are equipped with surprisingly similar-looking card-shaped IR remotes to use on them. These remotes have a tendency to get lost and always be in the place that you did not…
Hello Tribe, just a place to put your remotes
This remote holder has a slot for a AppleTV 4K remote and a slot for a Klipsch bookshelf speaker remote. There is a third slot that just happened to be the area left over in the design. I plan to make another version without the third…
3D printed caddy for holding three IR remotes for TV, set-top box, home assistant etc. It can be attached to the edge of a window ledge for easy access. The remotes won't disappear inside your sofa anymore. Print Settings Printer brand:…
Simple case for the Klein tools remotes, the only hardware needed is a pair of 3mm screws to hold together the top
print up right with supports for the barrier. happy printing
I designed this box for an empty spot on my couch. I thought it might be the perfect spot for the remotes and cables. The smaller part is removable an it holds inside the bigger box with a “kind of hooks i guess”. This liitle container is…
Cello's 12V Traveller webOS TVs are everywhere in caravans and motorhomes, but the remote gets no home — it lives on the sofa, the floor, or under the sofa. Searched all the usual sites: holders exist for the old Vesten-style caravan…
I always have small remotes lying around on my desk, so I thought I'd find the right place for them, so I ended up making a remote holder. It came out thight fit because i measured one remote but the second is slighlty bigger, but they…
I made this to hold a remote for the Silverstone LSB02-E I got as a review sample. I made it so you can mount it with standard drywall/wood screws, 10mm diameter round 3mm thick magnets, or just double side tape it. I imagine this will…
End the hunt for the remote. Three compartments step up from front to back, so every remote stands where you can see and grab it, with room for a phone, glasses or a games controller. DETAILS • 130 x 90 mm, 95 mm tall at the back. •…
Holder for multiple remotes. I got tired of sorting through the four I had to find the right one at any given moment. Now each one will have its specific place. Easy to ungroup and add or subtract sections.
Stand for TV remotes. It has six slots; three thicker, three thinner. Print with PLA or PETG, no supports needed.
This minimalist remote control holder is designed to keep your living room tidy while blending seamlessly into modern interiors. The angled front makes it easy to grab your remotes, while the internal dividers keep everything organized…
The buttons are cheap and use the EV1527 code. They're available in at least white housings with red, yellow, green or blue ring. ZigBee versions in similar looking cases are also available (one version is a sos button), but I haven't…
Dual Remote Holder – Clean, Simple, and Functional Keep your space organized with this sleek dual remote holder! Designed to neatly store two remotes side-by-side, this holder helps eliminate clutter on your desk, nightstand, or coffee…
Print in TPU or Flexible PLA. This adapter is intended for a wide variety of Roku remotes. Designed to slide over the bottom of the remote, this adapter securely holds an Apple AirTag. Never lose your remote again!
SUPPORT MY WORK If you appreciate my designs and would like to support my work, or if you're interested in a commercial license to sell my models, here are some options available: PayPal Subscription Plan: Subscribe Here Patreon Site:…
