AmazonSmall_RAK_DesiccantBox_2X18650
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meshtastic Carrier Board for RAK Wisblock in Small Box with Desiccant container.This version is for an externally…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Meshtastic Carrier Board for RAK Wisblock in Small Box with Desiccant container.
Options: Mount a double 18650 battery holder or a flat lid on the desiccant box.
Printing:
- Print out of ASA or ABS to withstand heat.
- I like 4 or 5 wall loops and about 40% infill.
- 0.4mm nozzle
- Supports shouldn't be needed
This version is for an externally powered Meshtastic radio: WisBlock Base Board 2nd Gen RAK19007
I'll make another one later with an 18650 battery holder on the desiccant lid.
Fits Junction Box from Amazon: Project Box, 5.9"x 3.9"x 2.8"(150x100x70mm), Grey https://www.amazon.com/dp/B07KXRW62F?psc=1&ref=ppx_yo2ov_dt_b_product_details
Use M3 self-tapping screws for the WisBlock and the desiccant box lid
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
**Rafts:**
No
Supports:
No
**Resolution:**
0.4mm
Infill:
25
**Filament:** Generic ASAHow I Designed This ===================
Designed in solidworks. Non commercial
Category: Electronics