Game cube base for switch with controller adapter cavity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for switch OLED and normal, with cavity to snap gamecube controller adapter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Here is a Nintendo Game cube base for Nintendo switch. This dock have a cavity where you could fit your Nintendo Gamecube controller adapter. You only need to insert the adapter by the frontal side and then simply fit the frontal panel. My suggestion is DO NOT GLUE IT, because controller adapter will not fit by the back. The panel is done to fit and do not get loose.
Personally, for a better finish on texture, I print base with back side lying on the bed (you need supports only for upper part, sides does not need them) but probably will also work with front lying on the bed. For the panel, I did not like the quality with it printed lying on the bed with the back side. I printed a second time with panel standing on bed with any side (I use the lower one).
NOTICE: I haven't print it for a normal switch, only tried with OLED and I know it fits. I made a version for normal switch according measures I've seen on internet. I leave the base for normal with a base of 176 x 55 mm. If modification is needed, feedback will be greatly appreciated!