1 / 3
Swivel Hanger — zdjęcie 1
1 / 3

Swivel Hanger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 2 piece (printed) swivel hanger. Purchased pieces are required to fully assemble. Parts will be listed below.

Ocena
0 / 5
Polubienia
6
Pobrania
29
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Short back story to this and the sister design short to follow. I adopted a hanging basket that was gifted to my girlfriend. She forgot about it and it was in the path of my nightly chores and it wasn't looking great. I was able to save it but noticed that the area that I hung it up, was half shaded. The shaded half of the plant would always look half dead and so I would unhook it and spin it. Looking for some things to print, I came up with this.

 

It's a 2 piece (printed) swivel with two counter sunk holes in the mount base sized for a #8 screw. 

 

The parts are designed to be imported and should be in the correct orientation to print without supports. There may be a few hanging bridges so supports can be added if desired. 

 

BOM:

1 pc Mounting Base

1 pc Ring

1 pc M3 SHCS 16mm long 

1 pc M3 hex nut 

1pc 623z ball bearing (3mm ID x 10mm OD) 

Tagi