1 / 3
Swivel Hanger — image 1
1 / 3

Swivel Hanger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a 2 piece (printed) swivel hanger. Purchased pieces are required to fully assemble. Parts will be listed below.

Rating
0 / 5
Likes
6
Downloads
29
Makes
0
Views
207
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Short back story to this and the sister design short to follow. I adopted a hanging basket that was gifted to my girlfriend. She forgot about it and it was in the path of my nightly chores and it wasn't looking great. I was able to save it but noticed that the area that I hung it up, was half shaded. The shaded half of the plant would always look half dead and so I would unhook it and spin it. Looking for some things to print, I came up with this.

 

It's a 2 piece (printed) swivel with two counter sunk holes in the mount base sized for a #8 screw. 

 

The parts are designed to be imported and should be in the correct orientation to print without supports. There may be a few hanging bridges so supports can be added if desired. 

 

BOM:

1 pc Mounting Base

1 pc Ring

1 pc M3 SHCS 16mm long 

1 pc M3 hex nut 

1pc 623z ball bearing (3mm ID x 10mm OD) 

Tags