Ender 3 V3 SE Stock Fan Relocation Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocates the stock 4010 fan and it's duct to the side
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I wanted to move the stock fan to the side, for better access and view of the hot end, allowing inspection of first layers etc.
Uses the stock duct, which is attached to the 4010 fan, as so far I'm happy with the cooling.
Will be uploading a 5015 version as when this fan fails, I will take the upgrade patch to a larger part cooling fan.
Printed in Creality Black CR-PETG, 0.2mm layer height, 245°C nozzle, 80°C bed, 100% infill for a strong part.
Later I modded the screw holes to delete the chamfer and used computer case M3 screws (hex with philips) as the stock screws cracked the flange due to the chamfer.