1 / 3
ZimaCube Fan Spacer for 25mm Fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ZimaCube Fan Spacer for 25mm Fans (e.g.: Noctua NF-A8 PWM)
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 328
- Wydruki
- 1
- Wyświetlenia
- 1568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 7)Remiksy (0)Kolekcje (26)Powiązane
Spacer for mounting 25mm Noctua Noctua NF-A8 PWM on the rear of the ZimaCube. The standard fan cover will be clipped in the spacer.
In addition to the 3D-Printed part you will need 8x 5x3mm or 6x3mm Magnets for mounting it to the ZimaCube.
v1: Made the 3 Alignment holes at the top a little bit bigger
v2: Changed all 9 clip recesses from 9mm to 15mm wide
