1 / 4
Baseus 100W desktop charger magnetic mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach your charger to any metal surface with magnets!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
It's a pretty cool charger but doesn't come with a way to attach it under your desk - so I designed mount to do that using magnets :)
Beware! Inserting the charger into the mount might leave some minor scratches that will become visible after removing the charger. Don't use this model if you're not fine with that.
Printing
My printing settings:
- Material: PETG
- Walls: 3
- Infill: 15% gyroid
- Nozzle: 0.4
- Line height: 0.2
Assembly
- Apply some glue to the holes on the side and insert 2 20x5 mm magnets. I used two-part epoxy. The magnets are very strong so won't stay in place with friction alone.
- Once the glue has set, insert the charger into the mount. You might need to use a bit of force to slide it in all the way.