Magneto X LED strip mount (under Y-axis rail)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another way to mount an LED strip on the Peopoly Magneto X. Requires M3x8mm or M3x10mm bolts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- BSD License
You will need to print 10 of these. I recommend printing them with a relatively high-temperature-tolerant filament (I used Peopoly PETG-CF) if you're planning on have the bed go up to its rated 130°C.
My recommendation is to print them on their end with a small brim. Otherwise the nozzle has a tendency to knock them over while printing. Printing them flat on the base with some supports may also work fine, or even on the front edge, but I haven't tried that myself.
If you want to edit the source files, be sure to install the BOSL2 library into your OpenSCAD libraries folder first. (On Github, Code > Download as ZIP, then extract to %USERPROFILE%\Documents\OpenSCAD\libraries\ on Windows or $HOME/.local/share/OpenSCAD/libraries/ on Linux.)
Published under the BSD 2-clause open-source license.