Magneto X LED strip mount (under Y-axis rail)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another way to mount an LED strip on the Peopoly Magneto X. Requires M3x8mm or M3x10mm bolts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- BSD License
You will need to print 10 of these. I recommend printing them with a relatively high-temperature-tolerant filament (I used Peopoly PETG-CF) if you're planning on have the bed go up to its rated 130°C.
My recommendation is to print them on their end with a small brim. Otherwise the nozzle has a tendency to knock them over while printing. Printing them flat on the base with some supports may also work fine, or even on the front edge, but I haven't tried that myself.
If you want to edit the source files, be sure to install the BOSL2 library into your OpenSCAD libraries folder first. (On Github, Code > Download as ZIP, then extract to %USERPROFILE%\Documents\OpenSCAD\libraries\ on Windows or $HOME/.local/share/OpenSCAD/libraries/ on Linux.)
Published under the BSD 2-clause open-source license.