Universal battery pack with fan attachment (possible new accesories)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery box with switch with possible accesories. You need 15mm x 15mm x 4.5mm magnet. A bit of soldering skils and time
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Battery shell/printing
I recommend using tree support during the print, it is easily removed. The tray on the magnet needs a bit sanding, but it is possible (I use 5 mm thick magnet, if u use something like 4mm magnet or 4.5mm, it will be good) the tiny swich and connector (it isnt necesarry) i superglued to the shell and solder it with some cables… The connector hole needs to be cuted for the exact size! Also the holes for the cables needs to be drilled. The metals, that touches the battery I use from the old rc car, but it is possible to use cables as well. I recommend ducktaping the main shell for the durability, bcs it may crac on the battery cover. If you want, you can paint it :)
Accesories..
The magnet is on one side closer to another one (closer side is 1mm) total thickness is 2cm, so you can make brackets for the different usadge with the motor.. (I made fan)
Fan..
I recommend printing it on the side with support, nice kvality and the magnet fits without glue. (I put double-sided tape on the magnet to reduce vibrations. The motor needs to be zip tied to the bracket. I zipties also the cables, but it isnt necessary. Blade needs also supports and a bit sanding for the good finish. The prop is maded for motor with 2mm shaft.
I hope you will upgrade this model and let me know about the upgrades…. (in the comments)
Lets print it and say bye bye for the hot days….