BBQ Meat Thermometer Probe Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thermometer spool for a BBQ Digital Meat Thermometer Probe.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I modeled this thermometer spool when the ones I bought didn't come with one, despite it being shown on the box! Wasn't happy with the ones that have the probe exposed.
https://www.amazon.ca/BFOUR-Wireless-Bluetooth-Thermometer-Grilling/dp/B08C1YQ49D
While it's made for this particular BFOUR thermometer, (12mm diameter, 142.5mm long, not including the little 3.3mm screw at the top) I'm sure it can be sliced and/or resized for other probes or cables.
The lead is 106cm including the plug (8mm), and is meant to wind clockwise. The plug slides in from the top with only a bit of resistance.
A thin bead of CA or plastic model glue will do, and the tolerance between the pieces should be enough for most printers.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
Any
Filament:
Any