BBQ Meat Thermometer Probe Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thermometer spool for a BBQ Digital Meat Thermometer Probe.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 620
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I modeled this thermometer spool when the ones I bought didn't come with one, despite it being shown on the box! Wasn't happy with the ones that have the probe exposed.
https://www.amazon.ca/BFOUR-Wireless-Bluetooth-Thermometer-Grilling/dp/B08C1YQ49D
While it's made for this particular BFOUR thermometer, (12mm diameter, 142.5mm long, not including the little 3.3mm screw at the top) I'm sure it can be sliced and/or resized for other probes or cables.
The lead is 106cm including the plug (8mm), and is meant to wind clockwise. The plug slides in from the top with only a bit of resistance.
A thin bead of CA or plastic model glue will do, and the tolerance between the pieces should be enough for most printers.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
Any
Filament:
Any