Submersible Pump 3/8" Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hose adapter for submersible pump to use with 3/8" ID tubing.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 283
- Wydruki
- 1
- Wyświetlenia
- 808
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed out a Modular Hydroponic Tower, which was designed to use tubing with a ½" OD, 3/8" ID.
However, the submersible pump I purchased only had hose adapters down to a ½" ID, which was too large to fit my tubing. So, I designed a screw-in adapter to fit the threading of the pump and output to a 3/8" nozzle.
The threads fit my VIVOSUN Submersible Pump perfectly, and it inserted easily and securely into my 3/8" ID tubing.
(Note: I haven't tested it with other pumps, so if you try it with yours and it does or doesn't fit, please let me know so I can update the description.)
As the part is intended to be submerged, it's recommended to print in PETG. No supports or brim needed.