RYOBI 15A 7.25in Corded Circular Saw SHOP VAC ADAPTER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust Adapter Attachment for CORDED RYOBI Circular Saw
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 716
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model to attach dust collection to the 15A Corded Ryobi 7 1/4in Circular Saw (I believe it is Home Depot model CSB144LZK). The original dust adapter 200673002 is no longer sold. This model is not based on that adapter; it was designed ground up from measurements taken of the port of the saw itself. Unlike some Thingiverse models I found before deciding to design an adapter myself, this does not require epoxy to attach, only one M3 screw. The other side fits on a Ridgid Shop Vac hose. The hose may be sold as 2.5in diameter, however the coupler on the hose measures closer to 2.25in, and the inner diameter of the coupler on the adapter is 58mm.
Designed in Onshape and printed on BambuLab A1 in PLA Marble. Would probably be better to print in PETG.
Printed at 10% Rectilinear infill, Organic Tree Supports (support settings default), Shop Vac Side face down on the bed. I printed from the STEP file and included an STL just in case, but I can't speak to how well the STL prints.
