Gas Can Rack remixed for 1/6 Yamaha
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will use the top 2 bolts from my tunnel extension to fix the rack, hiding the screws at the same time (bonus!)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This will use the top 2 bolts from my tunnel extension to fix the rack, hiding the screws at the same time (bonus!) and i've made a small clip that you can attach an elastic hair band on to make scale straps that will lock in place (hopefully) when inserted and turned 45 degrees.
* UPDATE V2 clip, bigger/better, just get it :P
Print them on the side, with the hole facing up.
I was amazed myself how strong they are for such tiny clips and the locking system in the plate works great too !
- I think the gas canister is better printed @128% scale for this particular project.
Print instructions
Category: R/C Vehicles