1 / 3
Tanjiro Hinokami Kagura - Filament Painting — zdjęcie 1
1 / 3

Tanjiro Hinokami Kagura - Filament Painting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A painting of Tanjiro performing his Hinokami Kagura

Ocena
0 / 5
Polubienia
18
Pobrania
48
Wydruki
0
Wyświetlenia
399
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

___________________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
________________________________________________________________________________________________________________________

 

 

A painting of Tanjiro performing his Hinokami Kagura.

 


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4
PLA Jayo Gray Transmission Distance: 2.1
PLA Jayo Matte White Transmission Distance: 4.6
PLA KINGROON Red Transmission Distance: 4
PLA KINGROON Yellow Transmission Distance: 6
Color Pallete:

 

Swap Instructions:
Start with Black
    At layer #13 (1.12mm) swap to Gray
    At layer #21 (1.76mm) swap to White
    At layer #27 (2.24mm) swap to Red
    At layer #31 (2.56mm) swap to Yellow for the rest.

Tagi