Tanjiro Hinokami Kagura - Filament Painting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A painting of Tanjiro performing his Hinokami Kagura
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 48
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
___________________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
________________________________________________________________________________________________________________________
A painting of Tanjiro performing his Hinokami Kagura.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4
PLA Jayo Gray Transmission Distance: 2.1
PLA Jayo Matte White Transmission Distance: 4.6
PLA KINGROON Red Transmission Distance: 4
PLA KINGROON Yellow Transmission Distance: 6
Color Pallete:
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Gray
At layer #21 (1.76mm) swap to White
At layer #27 (2.24mm) swap to Red
At layer #31 (2.56mm) swap to Yellow for the rest.