Robotic Arm Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,56 € – 0,69 € netto (bez VAT)
Dla pliku: Robotic Arm Part 8 v12, Insert v4, Insert 2v5 _0.4n_0.2mm_PETG_MINI_47m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,63 € netto (środek widełek).
- Masa podana przez autora
- 5 g
- Czas druku podany przez autora
- 46,8 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a model of a typical robotic/mechanical arm but it can be used as a phone holder.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: Some parts may not be inserted properly, if you are having trouble inserting the joints together, I suggest either removing the screw mechanism an instead just make it a flat smooth surface, or make the insert or hole just a few mm bigger, however you decide to do it.
IMPORTANT:
This model is made for a PRUSA MINI+ since it's the only one I have lol, but I've attached the step files, STL files, project files, and g-code files for any of your needs, if your phone is bigger than what the model can hold, then you're free to customize as you like. The arm is also designed to be mounted and attached, meaning that you can also create other parts as long as they attach correctly. If you would to change the phone holder for something else, then you can also do just that. Again, the arm may not come out to your designated measurements, since the g-code and projects are made to fit a PRUSA MINI+, that is why you can use the step files to customize at your own convenience.
Instructions:
To assembly the robotic arm is very easy, you just need to attach into the correct holes with the correct parts. Each part is numbered accordingly to how they are assembled, meaning that part 1 is the base, and part 8 are the claws so the last part. I suggest printing how the numbers go just so it's easier to remember what parts you need to print and what parts you still have to print, but it's up to you really.
For the parts, you mainly just need one of everything, but you will need to print 2x of part 8 (the claws) and 2x of the small inserts (for the claws), everything else you print once. The project has the right amount of the extras you need so you can also use the project if it's easier for you.
The assembly is made so that you can move the arm around, but it you would like to keep it more stable then you can also super glue it.