Aygo seat bracket cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Krytka držiaku zadného sedadla
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello. I didnt like how the lower bracket of rear seat in Toyota Aygo 2 facelift (KGB40) is visible. Therefor I designed a cover for this area. Depending how your specific seat is mounted, you can choose to use the cover with cutout, or without. In my case, right side was different and needed the cutout version, while left side used non coutout. Cover is held on top of screws that hold the bracket - just push it in to position.
Note: Remember to mirror whatever part you need, in case you will use the cover on your specific side - Covers have just 1 mounting hole (as there is only one protruding screw in bracket. (for example, using LH stl file on right side requires mirroring this part to have the mounting hole in correct position)
For printing I used PETG, so far both covers are fine.