Guided Rail Carriage System - Roller Edition - Open Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a movement system system, where the Rollers are running on a guide rail.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 218
- Wydruki
- 0
- Wyświetlenia
- 1634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
It is originally designed for use in furniture, but there are many more applications, where this system can be used.
You will need 604 bearings and M4 nuts, bolts and washers.
I designed this system, because I could not find any drawer systems that where short enough for my usage. The rails are 150mm long, but I will make sure to upload rails in different length.
I printed everything in PLA, but it can make sense to print the wheels out of TPU depending on the application.
There is also a completle different version of my Open Drawer Design, wich graps a rail from both sides: https://www.prusaprinters.org/prints/95080-guided-railslide-carriage-system-open-drawer-proje
And I also have a drawer slide design, that does not need any bearings.