RLAARLO AK917 Rear Toe -in / Anti-squat bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These inserts are for the front aluminum mount of the rear hinge-pins. 1mm toe / 1mm anti squat
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For those wanting to tame the RLAARLO 917 for on-road fun, these inserts provide much needed stability in cornering and acceleration for the rear of the car. They are a tight fit, and once pressed in place, use an 1/8 drill bit to size the hole.
The toe-in greatly increases cornering stability and the anti squat gives the rear-end better traction on acceleration.
I also recommend moving the shocks inward at the top and outwards at the bottom. a 1/8 spacer can be added to the rear shock lower mounting point to move them outwards. Lastly, be sure the sway bars are equally loaded side-to-side. I love these cars, but they don't come set-up properly.
