42 modeli
Discontinued Working on a V2 because the 2 parts are not as well connected as I would like. The Comfort Allen Key Grip This model is a two-part grip designed to enhance the comfort and efficiency of using standard L-shaped Allen keys. !I…
This is the anchor handling tug, roughly modeled after an 160 ft anchor handling tug. This model was developed with play in mind. These tugs are used in open water to move ship or oil rig moorings as well as general towing. It has a blend…
This is the first release of a model that I intend to refine further. Help test this out, provide your feedback. This assembly reduces auxiliary fan noise and improves chamber heat retention. While also preventing the buildup of hot spots…
*Component Added - Clip with 11.5mm LED strip gap This is a newly created model for my enclosure to organize and clean up my enclosure wiring and led lights. The conduit can be printed in white to act as a diffuser over top of led strips.…
Comes in two Parts. The upper Bridgepart of a RC Scale Boat, around 1:45 Scale. Takes 8.5h one Part. The main house are 3 parts.
Neue Version mit Daumenauflage!!! Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und…
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
The Source Model is no longer available and was removed from the Author (The new Update of Thingiverse brought back the file, even if it is no longer listed in the Authors profile… therefore, I'll share the link to the original file here:…
the model is meant for printing in TPU, I tested with eSUN 95A Printed with 0.16mm layers, 2 wall loops, 5 top/bottom solid layers and 30% gyroid infill
Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und hinten unter der Hanfläche an den…
Precision Attachment for Leatherman Ratchet Tool – Perfect Fit & Easy Handling This minimalist and practical attachment is designed to precisely match the shape of the Leatherman Ratchet Tool. Thanks to its precise construction, it fits…
---- I modified the previous model to allow the ball to spin at high speeds with a larger diameter, while ensuring it remains stable and does not topple over even when it exceeds 20cm in size. previous model :…
Dice Tower - The Air Handling System - A dark and dirty story... The megalopolises are full of stories. Just as the dead are as well. This is the dark tale of… The Air Handling System. Woe to them that seek deliverance in its dark…
I made this with the following dimensions : 45/45/152.4 You can adjust the height as needed but the width is perfect for hockey sticks at all levels.
Ein kleines Update für den unergonomischen Serien-Türgriff des QIDI Q2. Die Serien-Schrauben können weiterhin verwendet werden. Ausrichtung: mit der Frontseite aufs Druckbett, ohne Support. Print Settings Printer Brand: QIDI Printer: Q2…
Trash can for Kobra S1 (for left side handling, mirrored)
this is a stick handling trainer used to practice your stick handling.
Ein kleines Update für den unergonomischen Serien-Glasplatten-Griff des QIDI Q2. Die Serien-Schrauben können weiterhin verwendet werden. Ausrichtung: selbsterklärend, mit der flachen Seite aufs Druckbett, ohne Support Print Settings…
Abstract: The implementation of automation has already had a considerable impact on chemical and pharmaceutical industrial laboratories. However, academic laboratories have often been more reluctant in adapting such a technology due to…
My toolhead was crashing with the "blower plate". Fixed the issue by rescaling “blower plate” and “mounting flange”. You have to cut one corner off the "intake duct" to get the screw in. Youll notice while assembling.
Update 7,10,2026 I’ve added the spolhoder_USS_v2 and USS_v3 versions; a cap from another model can be used with these versions. 4.10.2026 update_ Added markers for INDX coils. Text editable in PrusaSlicer Embossed text can easily be…
I wanted to try and coat the downside of a phone holder with some latex to prevent it from sliding around on the table. So i thought the best way would be to just dipp it instead of painting it. I couldnt find anything near to what i need…
Hej! I made a controller for educational use, ship handling simulations or even radio controlled vessels. As simple as it is the whole project consists of three groups. 2x tiller, 2x throttle and 1x button panel. Tiller: 1x Tiller Base 1x…
Cup for maintainance of the aquarium, trimming plants, putting new fish in, etc. Recommend printing it in 0.2 Petg to be watertight. 1.05 flow should be fine. Can be scaled down, just pay attention to the hook on the side - it has a gap…
To assemble the model you will need; -4 M5X20 screws -4 M5 Nuts -4 x washer/washers that equal 2.5-3mm in height Instructions for printing: -Use 95-A TPU -Print so the build plate is touching the side that it will slide on.
Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet gegenüber Dateinutzern nicht für Schäden, die durch deren Nutzung entstehen.
This holder for 5 or 10 Vaccine Bottles is designed to keeping the Bottles upright and secure in the fridge / refrigerator. The 5 Vials Version is designed for a safer and better handling to fill a syringe. Print Settings Printer Brand:…
Tube rack for 50 mL centrifuge tubes with FISH microscopy slides Category: Biology
I am not the original author. Published here as a make. All credits go to M. Solar and N. Trapp, J. Appl. Cryst. (2018). 51, 541-548 Link to the paper: https://doi.org/10.1107/S1600576718003291 Follow the link above for an interesting…
For a long time we have been dealing with the air conditioning we share with our neighbour below us, he is an avid smoker and an elderly gentleman. Some time ago he did a complete renovation of the apartment and the air ducts which are…
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
This is a remix of VanessaE’s model, which is itself a remix of Calamari’s original model. This version takes the simplification one step further, prioritizing printability, durability, and easier handling over accuracy, without ever…
This simple knob is designed to easy rotating the microphone on a Røde PSA1 microphone arm without touching the microphone itself. Additionally, it provides better grip in order to fix the microphone securely to the arm.
I store my batteries in boxes designed by @fusher. https://www.printables.com/model/63026-customizable-print-in-place-cases-for-button-and-c/files I use this to manipulate the smaller batteries. It is designed for 4mmx2mm round magnets. I…
This 3D-printed tool is designed as a practical aid for handling straps, webbing, and flat belts . Its fork-shaped profile allows easy guiding, holding, and positioning of flexible materials during coiling, organizing, or general workshop…
BEHOLD! A HAND HOLD TO BE HELD! Specifically designed for the HC Vesper's flip-up sight, but you can use it without the HUD if you want to. Uses 4x 94459A767 McMaster-Carr heat inserts and 4x M3x10mm screws. The sight piece is a little…
An insert to allow the clamps on top of the Miltenyi Prodigy to accept syringes. Print can stay in place, and syringes can then be clipped in and out of the system as needed. I printed in PLA at 0.2mm height with a 0.4mm nozzle. No…
A kit for building a handling wand and stand for manipulation of Spectrum Techniques radioactive test sources. Print in PLA with Supports. Head should be printed separately from the other pieces to minimize printing artifacts. The…
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
I wanted to try and coat the downside of a phone holder with some latex to prevent it from sliding around on the table. So i thought the best way would be to just dipp it instead of painting it. I couldnt find anything near to what i need…
I am not the original author. Published here as a make. All credits go to M. Solar and N. Trapp, J. Appl. Cryst. (2018). 51, 541-548 Link to the paper: https://doi.org/10.1107/S1600576718003291 Follow the link above for an interesting…
Put these on your stick to make a stick handling obstacle. Fits senior sized shafts.
