RatRig VCore (3, 3.1 and 4) Electronic Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own Electronic Enclosure for the Rat Rig VCore 3.1 and 4. I think it could also used for Voron and more printers
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 122
- Wydruki
- 2
- Wyświetlenia
- 1747
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created my own Enclosure for the printer and use it for my VCore 3.1 and VCore 4.
The Base Plate is 350x350mm (2 pcs. needed).
8 pcs M5x16 Countersunk screws are required to fix the corners.
16 pcs. M3x8 Countersunk screws and 16 pcs. M3N nuts are required to fasten the walls.
For the PowerInput is an C14 (with Fuse) to use.
I think this could also used for Voron and other printers.
The grey parts could be find here:
https://github.com/Rat-Rig/RatRig-PrintedParts/tree/main/V-Core-4.0
Parts: PP000301 , PP000302 , PP000304 , PP000305 , PP000306
If you want support me, buy me an coffee :-)