Pentel P200-series Eraser Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Say goodbye to the tiny erasers and metal cap on the Pentel P200-series mechanical pencils!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
My solution to my own problem. Figured I would share it. I hated the tiny eraser that came with my beloved P209 pencils and I hated the metal cap that I would constantly have to remove and was always afraid of losing.
It press fits into the end of the pencil, printing it in the incorrect orientation will mess up the press fit so ensure that it is printed in the correct orientation. The adapter is designed to be used Pentel's own Hi-Polymer® Eraser Caps. It is designed to fit a brand new eraser, a used one may be too stretched to stay on the adapter.
I have printed 5 of these adapters and put them on 5 separate P209s. The only fitment issues I had were using erasers that I had previously used directly on the end of the P209 which became stretched, I had to print a slightly oversized version to fit those erasers.
I printed all of mine on a Prusa MK4, 0.4mm nozzle, 0.2mm layer height, 15% infill and they turned out just fine. They are so small and so simple, printing them should be easy for just about any machine with any settings.