Liczymy pasujące modele…
I needed a heelplate for my Simagic P2000 pedals, so I designed and printed one. It can be printed in 2 parts (even on a Prusa Mini). You'll need 7pcs of countersunk M6 bolts: M6 x 20-24mm bolts - 4pcs for the 4 corners to fix the plate…
You'll need a larger 3D printer to print the heel stop in one piece
Remix of the adapted heel stop founded here https://www.printables.com/fr/model/679441-simracing-pedal-heel-stop It's a reproduction of the aluminium heel stop from Simagic but the height makes your feet taking a second point of rotation…
It reuses 4 of the m3 screws on the standoffs. They screw directly in the hole in the bottom of the box. Doesn't need supports if your printer is good with bridges. Maybe little supports for the conterbored holes on the cover. Need 2x…
Requires 2x M6 socket head cap screws to fasten to the 4040 extrusion. Does not require any additional hardware to secure the P2000 controller, it simply snaps into place as shown in the gif. Orient the part on the build plate so it…
Another spin for Simagic P2000 heel stop. Cut it in slicer in to two pieces to fit in one print job. Takes about 8h to print on Prusa core.
Here are the parts used to convert the Mobula7 V3 frame to the Mobigital Print these parts in TPU at 0.2mm layer height The spacers have the “cross” portion that joins them together, which makes it easier to get higher quality and sturdy…
Ich habe mal ein Adapter für die Simagic Shaker modelliert. Leider habe ich keine bei mir. Deshalb hoffe ich, dass der Flansch passt. Allgemein ist das Bauteil ziemlich straff in der Öffnung vom Pedal. Das muss so! Gebraucht werden 2x M5…
Made this Accelerator pedal for P2000 kit. It might work with other simagic products, but I don't know. **UPDATE 4/4/2025 Integrated M6 threads into the pedal and minor fitting tweaks. Created matching brake or clutch pedals. Easy to…
Modification of the original model by jos in Thingiverse to solve a design error in the turn signal side cover. Now it fits perfectly and is 100% functional. I recommend printing with the face up for a better finish.
Made this remix for my Autel OBD2 Bluetooth Scanners -AP200 -AP200M Fast Print no supports need. You have 2 versions ( CutOut or Full ) Files can be found in the files tab, leave a like and a rating , helps a lot!
Stand for using your multieffects Valeton GP200 LT comfortably in your desk with 2 available positions/angle. It is necessary to enable supports in the part "Valeton GP 200LT Support 1". For the rest it is not necessary.
A lid for the electrical box on the back of a Vespa P200
I couldn't find any adapter that works for the break pedal also, so I created my own version. This has cleareance for all pedals including break. You need 4x M4 x 35 screws and 4x M4 nuts. Printed with PLA works fine. Added also the…
I made this case to create something tidy for my wall mount of Tenda P200 powerline and glinet router to extend my wifi at home. Maybe useful also for you. My advice is to paste with vinyl glue the two pieces to avoid support on printing.…
My solution to my own problem. Figured I would share it. I hated the tiny eraser that came with my beloved P209 pencils and I hated the metal cap that I would constantly have to remove and was always afraid of losing. It press fits into…
Carburetor Spacer for Venturi Applications – for Vespa PX 200 and Vespa P200E This carburetor spacer is specifically designed for use in combination with a venturi intake. It ensures that the venturi receives sufficient airflow to operate…
You'll need a larger 3D printer to print the pedal plate in one piece
!!!SCALE THE MODEL!!! Please be very careful when removing the printed parts from the build plate and during assembly, as some parts are delicate and can be damaged if excessive force is applied. For the best print quality, I recommend…
Im Beispielfoto mit Prusament PETG (0,3mm Schichthöhe) gedruckt. Dieselben Druckeinstellungen sind im angehängten GCode (mit Farbwechsel) enthalten. Eine weitere GCode-Datei ohne Farbwechsel ist auch dabei. Erste Schicht Düse 240°C / Bett…
Full height PCI bracket for the Nvidia Quadro M2000, Quadro P2000, Quadro P2200 and likely some other Quadro based cards like PNY Quadro cards with 4 ports Related part numbers: 846379 844223-001 I needed this part because my card was…
This model allows you to hang your P20010 on the wall
A few months ago I damaged one of my PCBite SP200 probes. So i had to repair them. When i saw today those protective sleeve i thought lets print one of those. Unfortunately it didn't fit the SP200. So I designed a new one i started from…
This is the nxp200 O3 SwitchBlock. It was designed to allow modular mounting and dismounting of the DJI O3 Air Unit on multiple quads. Watch the video for more details: https://youtu.be/_UYBph-CrHs There is a “blank” BaseBlock that is…
A simple design of the rubber for the kick-start pedal of a Vespa or LML, valid for: Vespa P80-150X/P150S/P200E/PX80-200E/Lusso/'98/MY/'11/T5/Cosa also for LML Star 125- 200 2T/4T Printed in TPU 95A No Supports If you want a durable…
I wanted to mount the p2000 electrinics box with screws so I made this mod
I added the UBBI bowden adapter to the revised Sindoh open filament adapter for DP200 and DP201 printers. Essentially that Sindoh printer was designed to take proprietary filament cartridges and then they eventually allowed owners to use…
Replacement case for the Simagic P2000 Haptic Control board. Blocks the extremely bright LEDs to avoid lighting up your room. Newer "p2000box_2" tops have increased tolerances for the USB connector based on comments. Closed version is…
This is a simple bracket for hanging a ToolkitRC P200 power supply underneath a shelf. There is also space underneath for the power cables.
Matching Simagic P2000 pedal for the accelerator pedal I made. Integrated M6 threads.
I wanted to hide the bright green LED and I needed a way to mount the controller to my rig, so I came up with this box. You'll need to flip the lid when you print it, so the side with the letters is facing up. Otherwise, I don't think the…
P2000 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
Maybe as me, you received a green clutch spring that is actually a bit too wide to fit the retainer on the pedal, it results to a misalignment, rubbed the alluminium and makes horrible sound when you put some pressure on the green spring.…
Bracket / Holder for simagic board pedals P2000 or Haptic for alliminium profile. Assembly: Remove the back plate from the board and attach it to the printed part. Use the same screws as before. Easy to install. M5 screws for alliminium…
I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…
This is an alternative version of the P2000 pedals haptic adapter that uses heatset inserts instead of nuts and bolts. The adapter works for all pedals including the brake pedal, providing proper clearance for full functionality. Designed…
This is an adapter for cheap 25W 50mm little base shakers to fit the P2000 Simagic Pedals. You will need: 1 x M5 x 12mm socket head screw (to screw into the base shaker) 2 x M5 x 35mm socket or button head screws and nuts (to clamp the…
Aruba Networking AP200, AP300 wall/ceiling mounting kit. This is for mounting these APs to a wall or ceiling (including angled ceilings). It uses a two (2) part mount to allow for the fitting of the mount base without having to hold onto…
Thrustbearing Modification for Simagic P2000 Pedals to get rid of the Spring Noise and Feeling. Thrustbearing: AXK1024 The original aluminum part between the springs is replaced with the printed part, which re-centers the two springs.
adaptador para colocación de un tubo de conducto para salida de aire. colocalo con tornillo y tuerca o bridas Adapter for installing an air duct tube. Attach it with a screw and nut or cable ties.
Tapo TP200 TP210 camera mount for prusa XL (lasercut 5mm)
Printer brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: No Infill: 100% Filament brand: 3DPlast Filament material: CoPET or PetG
Recommend to print on its side to get the smoothest finish.
The Simagic P2000 Throttle Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These…
I Had to replace the bungee cords on my Nissan NP200's tie down cover with a thicker (8mm) bungee cord than the original (6mm). The original clip did not accommodate the thicker cord so I redesigned the clip to allow the thicker cord.
Philips SBC HP200 headphone holder.
Diese passgenaue Wandhalterung ermöglicht es, die Konsole der Wetterstationen Ecowitt HP2560 oder Froggit HP2000 sicher und platzsparend an der Wand zu montieren. Da das Originalgerät primär für das Aufstellen konzipiert ist, schließt…
The left and right sides are identical and can be used interchangeably. This applies to the Philips SBC HP200 headphones
Added holes and bosses to hold four Pentel P200-series pencils and four Pentel FloaTune 08 pens, converting the lid into a pen holder. Instructions Print using standard Multiboard settings 0.2 mm layer height 3 walls 15% infill Print face…
Repair kit earphone shackle for Philips SBC HP200
My footboard had gained alot of side to side play from what looked like the bearings the bolt goes through having been worn out, so I whipped this up in TinkerCad. I used .16mm layer height with PLA+ and 100% infill. 7 vertical &…
The Simagic P2000 Brake Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These inserts…
3D model for hinges of Fresh 'n Rebel's CULT 3HP2000 v1 001 headphones
Philips SBC HP200 Headphone - Ear Part Bracket
IEC C14 mounting socket for Meanwell SP series power supplies
I bought a Daytona DLP2000G 2000kg Low Profile Service Jack and was unhappy with the idea of the 2-piece handle moving around in the boot of my car while travelling to jobs so i made this basic holder to hold the two pieces together. next…
This throttle lever is designed to replicate the look and feel of the Tecnam P-Mentor power lever, perfectly adapted for the Honeycomb Bravo Throttle Quadrant . It provides a more realistic flight control experience , enhancing ergonomics…
Bracket / Holder for simagic board pedals P2000 or Haptic for alliminium profile. Assembly: Remove the back plate from the board and attach it to the printed part. Use the same screws as before. Easy to install. M5 screws for alliminium…
P2000 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
IEC C14 mounting socket for Meanwell SP series power supplies
The Simagic P2000 Throttle Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These…
The Simagic P2000 Brake Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These inserts…
I bought a Daytona DLP2000G 2000kg Low Profile Service Jack and was unhappy with the idea of the 2-piece handle moving around in the boot of my car while travelling to jobs so i made this basic holder to hold the two pieces together. next…
Tapo TP200 TP210 camera mount for prusa XL (lasercut 5mm)
This throttle lever is designed to replicate the look and feel of the Tecnam P-Mentor power lever, perfectly adapted for the Honeycomb Bravo Throttle Quadrant . It provides a more realistic flight control experience , enhancing ergonomics…
Brackets to mount the SMSL SP200 under the desk. It interlocks between the rubber feet so those need to be present. I printed them vertical and didn't need supports.
This 3D printable aircraft propeller is designed for a LEGO Technic axle and is inspired by the Raytheon NP2000 propeller used on the C-130 Hercules. It is suitable for display models, aviation themed LEGO MOCs or custom builds where a…
P2000 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
Thanks to Alpine Fab for uploading the step file! It just barely did not fit on the Core One L build plate, some little tweaks and it's now perfect! It will use the whole build plate so make sure your first layer is dialed in
Simagic P2000 pedal covers If you like little wider pedals or just change the color
The router I got from a marketplace, the B&D RP200, did not include the original shop vac adapter. I designed one with calipers and several iterations to connect to my Ridgid shopvac hose (the larger one) with similar dimensions to the…
these small block to use as limit to the acelereator, put some thick carpet or rubber as interface. printed with 100% infill
