Yetch CoatHinger IKEA PAX Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fit your Yetch CoatHinger rod into IKEA PAX 350mm deep wardrobes with this handy bracket.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Simone Giertz's CoatHingers (link) are the absolute perfect solution for the 350mm shallow IKEA PAX wardrobes (link), but the brackets it comes with don't quite work since the “back wall” of ikea wardrobes is cardboard-thin.
This bracket fits the PAX system's pre-drilled holes on the sides, and lets you fit all 12 of the the CoatHingers onto its bamboo rod (carefully cut down to 460mm long). I used some 12Gx18mm screws from my local hardware store, but the IKEA bracket screws you can get from them by asking nicely will work too.
Check out the CoatHinger on https://yetch.store/
I'm sure you can find IKEA yourself.
Printing tips
You want the piece to be rigid, strong, and not to crack when the screws compress it. I used 6 perimeters and a high density infill to make sure I had extra support. I printed in Prusament natural ASA on my XL.