1 / 1
Voron v0.2r1 rear panel for 120mm PC fan — zdjęcie 1

Voron v0.2r1 rear panel for 120mm PC fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If they can keep your PC cool, they should work to keep your v0 cool, right?

Ocena
0 / 5
Polubienia
8
Pobrania
50
Wydruki
0
Wyświetlenia
377
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If they can keep your PC cool, they should work to keep your v0 cool, right?

 

I'm running a Fysetc Spider which has integrated 12v fan outputs (MAKE SURE YOU USE THE RIGHT JUMPER). You could also achieve the same results with a cheap buck converter and a spare output on any other mainboard. I used an old coolermaster fan I had layoung around and it works great, plenty of airflow coming from the vents.

 

I modeled the holes to accept the standard voron BOM heatset inserts. They will protrude a little on the inside but you can't see it once it's assembled.

 

I recommend using Otann's panel quick clips with this mod, they make it so easy to get the panel on and off for tinkering:

https://www.printables.com/model/618679-voron-02-panel-quick-locks

Tagi