1 / 1
Upgrade for Sovol SV06 Plus Mean Well LRS-350-24 Power Supply (PSU) Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An upgrade mod for the SV06 Plus to replace the stock power supply with a easily available LRS-350-24 power supply.
- Ocena
- 1 / 5
- Polubienia
- 8
- Pobrania
- 97
- Wydruki
- 2
- Wyświetlenia
- 641
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (14)Powiązane
On my first version I created a remix of this model but then quickly realised after making a few iterations of it that it would actually just be better to keep it simple and more like the stock one supplied by Sovol SV06 Plus.
So I've made a totally from scratch version that should fit in nicely - everything the original already had should fit into this one - including the screws. So there are no additional parts to buy, just print and away you go!
For the upgrade you'll need:
- Mean Well LRS-350-24 Power Supply.
- This is a 24 volt 350 watt power supply, with the same mounting holes as the SV06 Plus stock.
- It is thinner than stock, but it is much quieter and the fan only turns on when it needs to (i.e. temperature operated).
- I know the SV06 Plus is marketed with a 500w 24v supply, but the printer actually uses way less than that. It will never use the full 350w, it actually comes in at more like 280-300w with everything turned on. So plenty of room for other upgrades.