1 / 1
Upgrade for Sovol SV06 Plus Mean Well LRS-350-24 Power Supply (PSU) Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An upgrade mod for the SV06 Plus to replace the stock power supply with a easily available LRS-350-24 power supply.
- Rating
- 1 / 5
- Likes
- 9
- Downloads
- 98
- Makes
- 2
- Views
- 642
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
On my first version I created a remix of this model but then quickly realised after making a few iterations of it that it would actually just be better to keep it simple and more like the stock one supplied by Sovol SV06 Plus.
So I've made a totally from scratch version that should fit in nicely - everything the original already had should fit into this one - including the screws. So there are no additional parts to buy, just print and away you go!
For the upgrade you'll need:
- Mean Well LRS-350-24 Power Supply.
- This is a 24 volt 350 watt power supply, with the same mounting holes as the SV06 Plus stock.
- It is thinner than stock, but it is much quieter and the fan only turns on when it needs to (i.e. temperature operated).
- I know the SV06 Plus is marketed with a 500w 24v supply, but the printer actually uses way less than that. It will never use the full 350w, it actually comes in at more like 280-300w with everything turned on. So plenty of room for other upgrades.