Filament Dry Box Lid with PC4 Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament dry box lid for PRAKI container and capped PC4-M10 fitting. Keep box sealed with no drilling or cutting.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 204
- Wydruki
- 1
- Wyświetlenia
- 1164
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This lid replaces the original lid on the PRAKI cereal box container allowing you to feed filament thru a PC4 fitting. Seal container without cutting into it. Use knurled cap to seal container when not in use.
Fitting is sunken into the container a bit to allow the lid to print flat with minimal (manual) supports. Cosmetically best if you print on a smooth PEI plate instead of textured.
Only tested with PC4-M10 feed-thru fitting as that works best. Push PTFE tube thru box for smooth feeding. Pull out fitting and attach end of filament with filament stopper.
Bambu / Orca profiles tested. Prusa profile included, but not tested as I do not have a Prusa printer (yet). STL files included, but only the remixed ones. The remainder, including a PC4-M6 fitting, can be found on woelpi's PC4 drybox feeder.