AstroCat - HueForge Painting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AstroCat - HueForge Painting - No AMS / MMU required!
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- No AMS / MMU required!
My first attempt at generating my own image, running it through HueForge, and printing it!
Large model, normal for slicing to take a while.
Instructions :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Tested at 100% scale. Z scale must remain 100%.
Filaments Used:
RAPID PLA+ Elegoo Black Transmission Distance: 0.8
RAPID PLA+ Elegoo Blue Transmission Distance: 4.8
RAPID PLA+ Elegoo Orange Transmission Distance: 5
RAPID PLA+ Elegoo White Transmission Distance: 9.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #15 (1.28mm) swap to Orange
At layer #21 (1.76mm) swap to White for the rest.
I recommend using progressively lighter colors, as I did, going from black, to blue, to orange, finally to white.