Coffee blind shaker with distributor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shaker model for a 58mm portafilter basket.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Open Community License v1
This is a model for a coffee blind shaker. However, I used it also as a dosing cup (weight the coffee beans. Just pull the stem up for the beans to drop in the hopper), as a funnel (sits under the grinder), wdt (has a base that kind of evens the coffee bed, you turn the stem).
Have the idea that the rim that sits inside the basket helps improve the flow , since this area usually doesn't get much flow. At least on my machine, the pressure can reach 10 bars, so don't think I'm getting channeling there
Obviously designed it for use with my machine, but would imagine it should be compatible with most
Prints without supports (but use brims). The model has 3 parts, so you need to print them separate and in the best orientation (auto orient works).
Currently trying out petg, since pla gets dirty within the layers.