1 / 11
Sovol SV08 Enclousure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a printable Enclousure for the SV08.
- Ocena
- 5 / 5
- Polubienia
- 279
- Pobrania
- 1314
- Wydruki
- 4
- Wyświetlenia
- 8900
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (24)Wydruki i komentarze (Wydruki: 4) (Komentarze: 38)Remiksy (1)Kolekcje (361)Powiązane
I am printing ABS on my SV08 since a few months now with absolutely 0 issues (warping etc.). For me, its works fine :)
Hope you like it! Please leave a comment and like :)
The windows of the doors are 426 (-4/+0) x 166 (-4/+0) x 2 mm. I also made some printable ones, if you do not want a window or if you dont have any yet.
Easy to print and mount Enclousure for the SV08.
- Panel parts are glued together // maybe i gonna add a screwed version soon!
- try to be printed easy but still stiff
- Top Cover very strong, so its possible to put stuff on top of the printer (maybe filament dryer)
UPDATE 06.08.2024
- Doors uploaded! STILL NOT 100% done! I am printing ABS at the moment and it seems to be working perfectly!
- Gonna customize everything a little bit more!
- new pictures attached!
---------------------------------------------------------------------------------------
UPDATE 05.08.2024
- Doors more or less ready. First test version gonna be printed now and tested. Widows from 2mm thick acrylic glass (because i had it here). Maybe i will add a version without windows.
- No closing mechanism added yet - thinking about a good magnetic solution for now
- pictures added from the printed test-version coming soon!
UPDATE 02.08.2024
- Uploaded Top, Back and Left Panel sides! Remember, this is not yet perfectly finished!
UPDATE 01.08.2024
- to prevent rattle noise i used Tape on the underside of the panels https://amzn.to/3WIPyAu
- Uploaded some pictures of my prototype ! seems fine so far. Fitting nice!
- Also the Sunlu 4x Dryer standing on top, works great!