Trophy Ball-Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prominently presents Balls of Any Size! Easily Customizable for Sponsored Sport Events.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 318
- Wydruki
- 0
- Wyświetlenia
- 1033
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Intended Use
This universal ball-holder is intended both for collectors and enthusiasts as a celebratory trophy stand for a special ball as well as for clubs and tournament hosts that want to present their game balls as prominently as possible during a tournament or event (possibly with a sponsor's logo on the side). Therefore, the 3D model is kept as simple as possible to simplify customization. A few ideas for customization can be seen in the pictures above.
Nevertheless, feel free to use the model as you like (according to the CC-BY-NC-SA license). Let me know how you used and customized this print!
Universal Ball Sizes
This ball holder is suitable for balls in sizes 1 to 7, i.e. for balls with diameters from 14 cm to 25 cm. This makes the holder suitable for any handball, soccer ball, (beach-) volleyball or basketball.
The holder could potentially be suitable for American footballs. The ball will probably lie in the ball holder at an angle. Unfortunately, I have not been able to try it out myself. Feel free to test it yourself and upload a photo of it.
Printing
The model in plain can be printed in Bambu PLA Basic with a 0.4 mm nozzle and standard slicer settings in roughly 90 mins. The result from my A1 requires very close inspection to see any layer lines - printing the model standing on the bottom.
If you customize the model, consider printing it on the side with minimal support to optimize your printing time.