Modular baby bottle draying system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Being a new father we fount the need for a baby bottle drying system.
so with the help of our team mate we managed to make a modular drying baby bottles to fit our needs and for sure I'm not the only one.
Print settings:
NO SUPPORT!
3-4 Perimeters
5 top
5 bottom
0.2 layer height it can be done also with 0.25
10% infill I use gyroid
the hex tray doesn't need infill!
The dimensions for the tray are 260mm x 160mm
If you have a small 3d printer you can scale it down. for example if you scale it to 85% the dimensions will be 221x136 and it can be printed on a 235x235 bed. if you scale it down to 90% you need to position it at 45 Degrease to be on diagonal
Keep in mind that you will need to remember the % you scaled down or up the tray and use the same % for all the parts.
I have printed mine in PETG to ca be safe to wash it in the dishwasher and also it is more ware resistant