Modular baby bottle draying system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular baby bottle draying system hex tray
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 58
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Being a new father we fount the need for a baby bottle drying system.
so with the help of our team mate we managed to make a modular drying baby bottles to fit our needs and for sure I'm not the only one.
Print settings:
NO SUPPORT!
3-4 Perimeters
5 top
5 bottom
0.2 layer height it can be done also with 0.25
10% infill I use gyroid
the hex tray doesn't need infill!
The dimensions for the tray are 260mm x 160mm
If you have a small 3d printer you can scale it down. for example if you scale it to 85% the dimensions will be 221x136 and it can be printed on a 235x235 bed. if you scale it down to 90% you need to position it at 45 Degrease to be on diagonal
Keep in mind that you will need to remember the % you scaled down or up the tray and use the same % for all the parts.
I have printed mine in PETG to ca be safe to wash it in the dishwasher and also it is more ware resistant