SVS PC-13 Sledge upgrade spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D printed spacer for the PC-13 upgrade kit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
I've made a spacer for the SVS PC-13 amplifier upgrade.
It has been test fit with the original Bash amplifier and the Sledge 1200D in my 13 Ultra.
The height is 10mm but it can be scaled to fit your specific subwoofer needs. Be sure to contact SVS support to figure out the minimum required space. For my specific PC-13 Ultra it was 5mm minimum but I printed it in 10mm.
I would suggest printing this in ABS/ASA or PETG as PLA will deform under pressure and possibly go soft from heat which could lead to excess vibrations or air leakage.
- I am testing out PCTG+CF but may need to reprint it in ASA due to the heat sinking into the metal plate. I will update the description after extended testing.
The spacer is 222x361mm. STEP file included if anyone wants to modify it to fit in pieces on a smaller bed.
It will fit on the bed of an Ender 5 Plus in one piece.