1 / 4
Skooter Twist Throttle — zdjęcie 1
1 / 4

Skooter Twist Throttle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skooter Twist Throttle 3d model I designed to turn the normal boring throttle to a better mechanism 🛴🛴

Ocena
0 / 5
Polubienia
4
Pobrania
139
Wydruki
0
Wyświetlenia
864
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

3d print these two models seperately and use as follows:

  • No supports needed
  • No rafts needed
  • Layer height 0.18mm - 2.2mm 
  • Any filament material - use ABS if you have
  • Glue the small part to the bigger one using a strong adhesive glue. 

Enjoy!

Tagi