1 / 9
NeoTrix: Your Ultimate DIY 8x8 LED Matrix Display!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Welcome to the world of NeoTrix—your very own DIY LED display that brings a splash of color and creativity to any space
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Welcome to the world of NeoTrix—your very own DIY LED display that brings a splash of color and creativity to any space! Imagine a compact, versatile device capable of mesmerizing animations, dynamic notifications, and ambient lighting, all in a sleek, custom-designed enclosure. Whether you're a hobbyist, a maker, or just someone who loves tech, this project is perfect for you.
For full Build Guide got to my Instructables link : - here
Parts and Tools Required
- Electronics:
- 1x ESP32 NodeMCU board - buy
- 1x 8x8 NeoPixel matrix (WS2812B) - buy
- 1x Type-C TP4056 charge controller - buy
- 1x MT3608 Boost converter (output set to 5V) - buy
- 1x 18650 Li-ion cell
- 1x Slide switch small
- 1x Frosted Acrylic sheet 1mm thickness 83x83mm
- Prototyping board
- Jumper wires
- Type-C cable for charging
- 3D-Printed Parts:
- Cover: Houses the front frosted acrylic sheet
- Grid: Holds the 8x8 matrix
- Back cover: Includes mounts for the PCB assembly
- Mid-plate: Holds the grid and the LED array, screws into the back cover
- Hardware:
- M3 fasteners (30mm and 5-8mm)
- Screws for assembly
- Tools:
- Soldering iron and solder
- Screwdrivers
- Hot glue gun (optional)
- 3D printer (or access to one)