Deckbuilder tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tool helps when building a deck, patio, pier or any other similar construction
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
This tool helps when building a deck, patio, pier or any other similar construction that requires you to space planks evenly (5mm) and have screws distributed evenly.
Just insert the “claws” on the both sides of the frame, push the plank under it and screw using the 2 holes in the tool.
In case of joining 2 planks, use the side half holes to screw and center holes to aim the planks. for best experience, print couple to stabilize the plank at least from 2 positions.
The tool itself is 5mm thick to accomodate putting it in spaces where you cant for example sink in the “claws”
The model assumes that the deck frame is 2" wide. The planks should be 120mm wide and spacing 5mm.
If needed I can do other sizes as well.