Typhon Grom Drift Sleeves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your Typhon Grom into a drift car with these easy to print tire sleeves.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 174
- Wydruki
- 2
- Wyświetlenia
- 879
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Rather than printing a whole new set of wheels, these sleeves fit snugly over the stock tires and turn your Typhon Grom into a drifting machine. They're 3mm thick and last a very long time.
I recommend printing in PLA or PETG. I used 4 walls which equated to 100% infill. I'm still running my Grom stock and have not yet converted to brushless, but after a few battery packs they still look great, nicely broken in. They stay on the tires fairly well, although if you have a brushless system it's likely they won't last as long, but you should dial down the speed anyway because it'll be undriveable if you're heavy on the throttle.